mall powder quantitative packaging machine is a kind of powder packaging machine, and it is also a new generation of high-quality small packaging equipment. The equipment adopts advanced stepping motor control technology, which has high measurement accuracy, low equipment failure rate, stable and reliable performance of the whole machine, and has functions such as automatic measurement and filling, measurement feedback, automatic calibration, out-of-tolerance alarm, and counting. The packaging machine is composed of a main machine and a calibration scale, which can effectively carry out quantitative packaging for powder products that need to be packaged. It has the advantages of fast packaging speed and high packaging measurement accuracy. Good equipment plays a major role in production. After purchasing the equipment, I don’t know how to install it. Here it is. Come and watch.
The use environment and conditions of 2018-4D equipment:
1. The whole machine must be reliably grounded nearby, and the grounding resistance is less than 4 ohms.
2. The working environment of the powder packaging machine should be isolated from strong electromagnetic field sources.
3. The grid voltage fluctuates, and the highest peak value shall not exceed 20% of the normal voltage.
Installation and commissioning of equipment:
1. After unpacking, please check the packing list first and check the random accessories.
2. The equipment should be installed horizontally, and the body should be reliably grounded.
3. The order of parts installation: hopper cover—agitator—hopper—filling screw—cup
4. Adjust the height of the screw: remove the sign, loosen the fastening screw on the upper end of the long axis, and adjust the height of the screw to make the screw The distance from the lower end surface to the step of the cup mouth (if there is no step, it should be from the lower end surface of the cup) is about 1-2mm, and then tighten the fastening screws.
5. Adjust the concentricity of the material cup: When turning the coupling by hand, if there is friction and stagnation, you can loosen the three screws that fix the material cup to adjust until the resistance is uniform and lasts for an hour when turning the screw.
6. Connect the control cable plug: After turning on the machine, the rotation direction of the chain should be consistent with the mark; if not, please reverse any two phases of the three-phase power line.
Didn’t it benefit you a lot in two minutes? You don’t only have a particularly detailed installation and commissioning operation guide when you choose Express, you will also send professional personnel to carry out the installation and commissioning, so you don’t have to know how to start. Xunjie Machinery has a development history of more than 20 years. With 20 years of technical precipitation, advanced technology, great improvement and improvement in performance, rich experience, perfect after-sales service, and maintenance outlets in many regions, it is convenient for the whole country The needs of customers from all over the country, 24-hour service calls, and necessary on-site maintenance services are convenient for users all over the country. Welcome new and old customers to come.
