Low-voltage cable clamp manufacturer | Flame-retardant low-voltage cable clamp material
Good products will win the favor of users! I'm just a craftsman who makes cable clips with heart
Yuanneng Low Voltage Cable Fixing Clamp Introduction:
1. Cable clamp model: YGD-1, external dimension: 54×37×25mm, screw distance: 33mm, applicable cable outer diameter 8-18mm
2. Cable clamp model: YGD-11, external dimension: 88×44×25mm, screw pitch: 52mm, suitable for cables with an outer diameter of 18-28mm.
3. New cable clamp model: YGD-12, external dimensions: 100×64×30mm, screw distance: 67mm, suitable for cables with an outer diameter of 29-45mm.
4. Model of high temperature resistant cable clamp: YGD-13, external dimension: 140×80×35mm, screw distance: 100mm, suitable for cable outer diameter 43-59mm.
5. Insulation material cable clamp model: YGD-14, external dimension: 140×93×35mm, screw distance: 100mm, applicable cable outer diameter 55-70mm
Yuanneng Low Voltage Cable Fixing Clamp Introduction:
A customer asked me a very professional question: "What is the original design idea of your cable clamp? Now you are using bridges. What is your cable clamp better than bridges?"
Now I will tell you about the original design idea of our Yuanneng cable clamp: I was an electrician at that time. When we were constructing in the real estate cable shaft, the workers used nets to hang the cables on the 7th floor, which was very difficult. Every time you pull the cable is time-consuming and labor-intensive. I feel that it is necessary to ensure that the cables are fixed safely, no matter during construction or in use after handover, there should be no problems at all. So I feel that every 2.5 meters of the cable must be fixed with something to bear the weight of the cable itself. I designed a hole with a bracket attached, which can save the bridge frame in the project, but many projects do not allow the cable to be exposed , and some are directly fixed in the bridge frame, which is safer. Many Luban Prize projects use this method.
Later, I started to make cable clamps by myself. At that time, I had a hard time choosing materials. It was processed by epoxy resin board. Its performance is good, but the color is very simple. (Now I will use epoxy resin board for special needs. processing). Later, BMC composite material and SMC composite material were chosen. Their strength, flame retardancy, corrosion resistance, anti-aging, insulation, compression resistance, cold resistance, and tracking resistance are all excellent. And materials like this are used in automobiles, railway facilities, sporting goods, aircraft ships, wind turbine blades, etc. It is applicable to a wide range of occasions.
It has been 5 years since I have been designing cable clamps, and now the cable clamps are complete, ranging from ultra-high voltage 110kV-220kV cable clamps with a diameter of 45-160mm, and 10kV-35kV cable clamps with a diameter of 29-140mm, and mine high-strength cables Clamps, low-voltage single-hole cable fixing clamps, pre-branched cable fixing brackets. Low-voltage cable clamp manufacturer | Flame-retardant low-voltage cable clamp material
